TMR 6-2413WI

DC/DC Converter • • • • • • • • • • TMR 6WI Series, 6 Watt Highest power density in SIP package Wide 4:1 input voltage range Ultra-compact SIP-8 package Smallest footprint 6 W converter Temperature range –40° to +84°C High efficiency up to 88% UL 62368-1 IEC 62368-1 Indefinite short-circuit protection I/O isolation 1600 VDC Remote On/Off control 3-year product warranty The TMR 6WI series is a new family of isolated 6 W DC/DC converter modules with regulated output, featuring wide 4:1 input voltage ranges. The product comes in a ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0 cm² (0.3 square inch) of board space. An excellent efficiency allows –40° to +84°C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics. Models Order Code Input Voltage Range TMR 6-2410WI TMR 6-2411WI TMR 6-2419WI TMR 6-2412WI TMR 6-2413WI TMR 6-2415WI TMR 6-2421WI TMR 6-2422WI TMR 6-2423WI TMR 6-4810WI TMR 6-4811WI TMR 6-4819WI TMR 6-4812WI TMR 6-4813WI TMR 6-4815WI TMR 6-4821WI TMR 6-4822WI TMR 6-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'500 mA 1'200 mA 666 mA 500 mA 400 mA 250 mA 600 mA 250 mA 200 mA 1'500 mA 1'200 mA 666 mA 500 mA 400 mA 250 mA 600 mA 250 mA 200 mA November 7, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 600 mA 250 mA 200 mA –5 VDC –12 VDC –15 VDC 600 mA 250 mA 200 mA typ. 81 % 84 % 86 % 87 % 88 % 87 % 84 % 87 % 87 % 81 % 84 % 85 % 87 % 87 % 87 % 84 % 87 % 87 % Page 1 / 4 TMR 6WI Series, 6 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: Surge Voltage Recommended Input Fuse Input Filter 6 mA typ. 6 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 1'600 mA (slow blow) 1'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Cross Regulation (25% / 100% asym. load) - single output - dual output Capacitive Load - single output - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Transient Response ±1% max. 0.2% max. 0.2% max. 0.5% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 5% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 3.3 Vout models: 5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - Response Time 50 mVp-p max. 50 mVp-p max. 50 mVp-p max. 75 mVp-p max. 75 mVp-p max. 75 mVp-p max. 50 / 50 mVp-p max. 75 / 75 mVp-p max. 75 / 75 mVp-p max. 2'200 µF max. 1'100 µF max. 680 µF max. 470 µF max. 470 µF max. 180 µF max. 680 / 680 µF max. 330 / 330 µF max. 180 / 180 µF max. Not required ±0.02 %/K max. 30 ms typ. Continuous, Automatic recovery 180% typ. of Iout max. 250 µs typ. (25% Load Step) Safety Specifications Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tmr6wi PD 2 OVC I - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 7, 2023 Page 2 / 4 TMR 6WI Series, 6 Watt EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity External filter proposal: Air: Contact: - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tmr6wi EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A 24 VDC models: KY 220 µF || TVS (SMDJ70A) 48 VDC models: KY 220 µF ||TVS (SMDJ120A) EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Remote Control - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Voltage Controlled Remote (passive = on) - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Regulator Topology Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF - Vibration - Thermal Shock 95% max. (non condensing) –40°C to +84°C +100°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/tmr6wi Natural convection (20 LFM) On: 0 to 0.5 VDC or open circuit Off: 3 to 12 VDC Refers to 'Remote' and '-Vin' Pin 2.5 mA typ. 0.5 to 3.5 mA 5'000 m max. Flyback Converter 522 - 638 kHz (PWM) 580 kHz typ. (PWM) Functional Insulation 1'600 VDC 1'000 MΩ min. 50 pF max. 2'930'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F MIL-STD-810F Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP8 Lead-Free Wave Soldering 260°C / 6 s max. 4.8 g All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 7, 2023 Page 3 / 4 TMR 6WI Series, 6 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 3d52af6d-fa49-4c0e-a557-7b40c7b6f315 - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmr6wi Outline Dimensions 11.2 (0.44) 0.5 (0.02) Pinout Pin Single Output Dual Output 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote Remote 5 NC NC 6 +Vout +Vout 7 –Vout Common 2.0 2 x 2.54 5.08 3 x 2.54 (0.08) (2 x 0.100) (0.200) (3 x 0.100) (0.16) 4.1 8 NC NC: Not connected –Vout 2 3 5 6 7 8 3.5 (0.14) 1 9.1 (0.36) Bottom View 0.25 (0.010) 21.8 (0.86) 0.50 (0.020) Dimensions in mm (inch) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin dimension tolerance: ±0.1 (±0.004) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 7, 2023 Page 4 / 4